MICROVIP3 PLUS is a portable Energy and harmonics analyzer, compact but powerful, for single and three phase systems.
l LCD display with high contrast backlit displays measurements in true RMS up to 33 magnitudes, while the large 1MB internal memory allows storage of data collected over long measurement campaigns, including records of the waveforms for voltage and currents.
The graphic printer programmabilie to 42 columns allows viewing of other 156 measures, among which the harmonics of V and I 1 to 24, with both DC component and displacement factor, and manual or time histogram Press ( spectrum) of the harmonics / waveforms.
The integrated RS232 serial port at high speed and the software Microwin add further power to Microvip3 Plus, allowing full graphical display and analysis of measurement data, both in real-time connection or by downloading the internal memory. It's never been easier to create clear graphical reports.

MAIN FEATURES

• Measurements in AC and DC
• Integrated Harmonic Analysis up to twenty-fourth order
• 1Mb integrated Flash Memory
• RS232 port for connection to PC
• Software included Microwin
• Cogeneration systems (4 quadrants)
• High accuracy (Class 1.0)
• mains or battery power

AIMS 'AND USE

The MICROVIP3 PLUS is intended for those users of electricity, which require a thorough knowledge of their plants and their systems. E 'extremely beneficial for plant engineers, installers, maintainers and electricians, for fault diagnosis and adjustment, and repair of electrical treatment plants.

The MICROVIP3 PLUS allows you to:

- Check the loads and consumption;

- Reduce overloads and power loss in the plants;

- Check the correct sizing of new plant entering service;

- Prevent problems due to overheating and poor insulation;

- Solve the problems of the power factor correction;

- Identify and eliminate load peaks and the consequent problems of power;

- Check naval installations and facilities to 400Hz to 600Hz plane edge;

- Check UPS with AC and DC outputs;

- Measure asymmetrical signals from PWM controller.

TECHNICAL DATA

• Power supply:
  Network: 230 ± 10% at 50 Hz or 60 Hz (115V version available)
  Internal: Battery Ni-Cd 940mAh.
  Charge cycles: 500
  Charging time: 24 hours
  Autonomy: 7 hours

• Inputs:
  Voltage: L1 - L2 - L3 - N: 600 Volt AC and Neutral 0 to 600 Hz; or 600 Volt DC
  Input Impedance: 4 Mohm
    
• Current: L1 - L2 - L3: 1 Volt AC at 0 to 600Hz

• Input impedance: 10k

• Display: LCD with backlight.

• Accuracy: Class 1.0 (EN 62053-21)

• Overloading of voltage inputs: Max Vrms 625 825Volt-peak voltage (720Vrmsinterviene protection)

• Overload of current inputs: 5 times full scale value (with an intervention of protection to the limit values)
• Number of scales: 3 voltage scales, 3 current scales

• Automatic scale change

• Scale change response time: 1.2 sec.

• Display refresh rate: 1 sec.

• Internal Memory: 1Mb non-volatile Flash
 
• Instrument Dimensions: 251x239x104 mm.

• Instrument Weight: 2,900 Kg.

• Operating Temperature Range: -10 ° C + 50 ° C

• Storage Temperature Range: -20 ° C + 60 ° C
 
• Relative humidity range (% RH): 20% - 80%

• Condensation: not permitted

Sirio is a low-cost multi-function meter at a 4 DIN module, ideal for measurement and display of the most important electrical parameters.
Sirius can be installed in single phase and three-phase unbalanced systems in a triangle or in a star, via sturdy 4 mm2 terminals for measuring the current and voltage.
E 'it equipped with LCD display with 8 digits displayed. The number of displayed measures 7 major True RMS RMS over 40 are available on the integrated RS485 serial port.
Sirius is equipped with two relay outputs, user-configurable for alarms, pulse or remote control.
All parameters are configurable from instrument keyboard already installed.

Polar Star has a powerful engine of analysis and calculation that allows a wide range of sizes and capabilities:
or standard measures also according to IEC 61000-4-30 of V, I, P, Q, A, F, PF, THD%, instantaneous values / min / max / avg, absorbed and products, energy meters (kWh, KVA , kVAr) absorbed and generated;
- Harmonic analysis of 7 channels (3 voltages and 4 currents) up to the 31st order, with its graphical and numeric display;
- Extent of outages and network brownouts;
- Extent of the DIP (voltage drops);
- Extent of SWELL (Surge);
- Graphical display of TREND (trends over time) of 6 selectable sizes;
- Measuring energy in 4 time periods (tariffs) set;
- Automatic connection test to determine if the connections of the voltages and currents are correct;
- Customization of the user display, which can independently choose which values to keep under control

CHARACTERISTICS

FUNCTIONALITIES

NORMS

STAR36 is a low cost rail DIN analyzer dedicated to measuring the main electrical measurements of a low and medium voltage system.
The measurement capacity of the absorbed and generated values as well as the main harmonic distortion values makes STAR36 a complete instrument in a very competitive price range.
RS485 communication completes the range of services made available to the user

STAR396 is a low cost 96×96 panel analyzer dedicated to measuring the main electrical measurements of a low and medium voltage system.

The measurement capacity of the absorbed and generated values as well as the main harmonic distortion values makes STAR396 a complete instrument in a very competitive price range.

RS485 communication completes the range of services made available to the user

DMM396 is an convenient 96×96 panel analyzer dedicated to measuring the main electrical measurements of a low and medium voltage systems.
The ability to measure powers and energies both absorbed and generated, makes DMM396 a very versatile instrument in a very competitive price range.
RS485 communication completes the range of services made available to the user.

VIP ENERGY 2K8 is a high quality panel energy analyzer capable of providing brilliant features and a very competitive price by offering a wide spectrum of measured parameters including THD%, the possibility of multi-protocol of the RS485 port and a precision class 0.5 %.

It is a professional solution, perfect for electrical panels, monitoring systems, on-board machine applications as well as for supervision and automation systems.

NanoVIP® CUBE 247 ™ is a powerful and versatile Power Quality Analyzer; thanks to the implementation of 3G connectivity, it allows the user to monitor the measured data in total autonomy and without the need to pass through local customer networks.

Thanks to 3G connectivity, NanoVIP® CUBE 247 ™ can keep the user informed about the status of the device and send the measurements to the Elcontrol Cloud (cloud.elcontrol-energy.net).

NanoVIP® CUBE 247 ™ offers the following connection modes:

• PUSH: NanoVIP® CUBE 247 ™ sends data directly to the Elcontrol cloud server cloud.elcontrol-energy.net; this mode is particularly useful if you want to remotely monitor the progress of a measurement started many kilometers away and do not have external access to the local network.
• REMOTE: NanoVIP® CUBE 247 ™ can be fully driven from remote even during survey in progress; this function is particularly usefull in case user needs to change survey parameters, check device progress, stop and restart a campaign and any other action required on device. All function are available to user without any restriction.
• SMS: NanoVIP® CUBE 247 ™ can send via SMS updates on device status, measurement alarms or event detection while the instrument is left in measurement at the customer.

The use of 3G connectivity does not preclude any of the measurement functions of the NanoVIP® CUBE 3G ™, in particular it is possible to start a campaign with storage on microSD and at the same time send the data to the cloud for remote monitoring of progress.

ATTENTION: 3G CONNECTIVITY IS PROGRESSIVELY REMOVED FROM SEVERAL AREAS/COUNTRIES. VERIFY 3G CONNECTIVITY BEFORE BUYING.